TM 9-4310-397-14
Figure 6-70. Number Cylinder Liners
(d)
Pull liners out of cylinder block with puller (item 23, section III, appendix B).
1
If the KCD10001 Puller is used, secure puller with two cylinder head cap screws. If the
D-01062AA or D-01073AA Puller is used, see following.
Figure 6-71. Pull Cylinder Liners
CAUTION
Do not over-tighten liner puller to remove liners. Doing so could easily
break liners.
2
When using the D-01062AA (or D-01073AA) Cylinder Liner Puller (Figure 6-72, 1) to remove
liners (2), be sure that jaw (3) of puller is correctly positioned before attempting to remove liner.
6-59
