5-6 3. HAND CRANK ASSEMBLY GEARS.

TM-5-4310-393-14 Air Compressor Diesel Engine Driven 20 CFM 3200 PSI Model KA7-DA Manual
Page Navigation
110

TM 5-4310-393-14 5-6 3. HAND CRANK ASSEMBLY GEARS. This task covers. A. Remove B. Inspect C Install Tools: Materials/Parts: Shop Equipment, Automotive Diesel Fuel NSN 9140-00-286-5294 Maintenance and Repair Grease, MIL-G-10925 NSN 9150-00-190-0705 Tool Kit, General Mechanic's Set Grease, MIL-G-21164 NSN 9150- 00-985-7317 Gasket,(3) (PIN 03210000) Equipment Conditions' Engine Secured, Removed From Frame and Placed on a Work Bench A. Remove. FIGURE 5-13. HAND CRANK ASSEMBLY GEARS 1. Removing the Gears for Inspection. a. Remove four socket head cap screws (Figure 5-13, Item 1) and remove housing (2). b. Remove and discard gasket (3) c. Remove needle bearing (4), oil seal (5), gear wheel (7) and locking pin (6) as an assembly. d. Remove needle bearing (4), oil seal (5), and locking pin (6) from gear wheel (7). e. Remove bushing (8) and disk (9). B. Inspect 5-15

Privacy Statement
Press Release
Contact