TM 5-4310-393-145-6.4. CYLINDER HEAD AND VALVE ASSEMBLYThis task covers' A Remove B. Clean C. Inspect D. Install E. Adjust F. RepairTools:Materials/Parts:Shop Set, Automotive FieldDiesel Fuel NSN 9140-00-286-5294Maintenance, BasicValve Cover Gaskets (PIN 03208902)Dial Gauge, 61208700Preformed Packing PIN 50288000)Retainer Bracket, 61275200Shim (5) (P/N 03209101)Valve Head GasketsEquipment Conditions:Oil Bath Air Cleaner RemovedMuffler RemovedInjector Removed From Cylinder HeadA.Remove.1.Removing the Cowling.a.Remove screw (Figure 5-14, Item 1)and hex nut (2) from cowling (3)b.Remove the socket head capscrews (4) and lock washers (5) holding the cowling tothe engine block.c.Remove cowling (3) from engine.2.Removing the Valve Cover.a.Loosen cap screw (Figure 5-15,Item 1), washers (2) and pipe clip (3 ).b.Remove two nuts (4) and two lockwashers (5).c.Lift valve cover (6) off cylinder head.d.Remove and discard gasket (7)FIGURE 5-14. REMOVE COWLINGFIGURE 5-15. REMOVE VALVE COVER5-17
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
