Section Ill. TROUBLESHOOTING
51. Electric Motor Does Not Cut In at
140 PSI, and Cut Out at 175 PSI
This section provides information useful in
diagnosing and correcting unsatisfactory opera-
components. Each trouble symptom stated is
followed by a list of probable causes of trouble.
The possible remedy recommended is described
opposite the probable cause. Any operational
trouble noted that is beyond the scope of the op-
erator or organizational maintenance must be
52. Compressor Pumps Too Slowly
reported to field maintenance. For engine trou-
bleshooting, refer to TM 5-2805-208-14.
47. Electric Motor Fails To
Start or
Fails To Run
Overheats
48. Electric Motor Reverses
49. Electric Motor Overheats
54. Compressor Fails To
Pump to
Pressure
52-57).