b. Installation.
67. Compessor Assembly (Model
OEH-34-60-ENG-1)
the air receiver tank platform (14)
a. Removal.
and secure the compressor in place
with four mounting bolts (13), lock-
(3) Loosen one compression nut (25, fig.
washers, flat washers, and nuts.
14) and
remove the
one end of the
(2) Position one end of the aftercooler
aftercooler (26) from the adapter
(26) in the adapter (24) in the check
(24) in the check valve assembly (22).
valve assembly (22 ) and tighten the
(4) Remove the four nuts, ]ockwashers,
compression nut (25).
flat washers, and bolts (13) that se-
(3) Install and adjust the V-belts (par.
air receiver tank platform (14). Re-
(4) Install the V-belt guard (par. 82).
move the compressor assembly.