Figure 18-Continued.
c. installation. Position the assembled belt
the V-belt guard (3) and upper bracket
guard and secure the lower bracket to the guard
as an assembly.
with capscrew (4), flat washers (6), and nut.
Warning: Never operate the air
Install the upper bracket to the manifold stud
compressor with the drive belt guard
with the nut (1).
off.
b. Cleaning and Inspection.
83. V-Belts
(1) Clean all parts with an approved
cleaning solvent.
a. Removal (Model OEH-34-60-ENG-1).
(2) Inspect the V-belt guard and mounting
(1) Remove the V-belt guard (par. 82).
brackets for dents, cracks, or other
(2) Loosen the four mounting bolts (7, fig.
damages. Straighten minor dents and
bends in the guard and brackets.
ward the compressor assembly far
(3) Inspect all attaching hardware for
enough to permit the two V-belts (2)
damaged threads. Replace damaged
to be removed from the crankshaft fly-
attaching hardware and replace a
damaged guard, bracket, or other de-
wheel (3) and the motor drive pulley
fective part.
(9).
