MEC 4310-247-15/31
Figure 31. Placement of charges.
son, it is necessary that operators be thoroughly
cluded in the operator training program. It
familiar with all methods of destruction of
must be emphasized in training, that demoli-
equipment, and be able to carry out demolition
tion operations are usually necessitated by
instructions without reference to this or any
critical situations when time available for car-
rying out destruction is limited. For this rea-
other manual.
Section II. SHIPMENT AND LIMITED STORAGE
nents and assemblies will be as outlined on the
"Preventive Maintenance Service, Quarterly"
a. General. Detailed instructions for the
in this manual.
preparation of the air compressor for domestic
c. Cleaning and Drying. All contamination
shipment are outlined within this paragraph.
shall be removed from the air compressor by an
Preservation will be accomplished in a sequence
approved method. Approved methods of clean-
that will not require the operation of previously
ing, drying, types of preservatives, and methods
preserved components.
of application are described in TM 38-230.
d. Painting. Paint all surfaces where the
spected for any unusual conditions such as
paint has been removed or damaged. Refer to
damage, rusting, accumulation of water, and
TB 740-93-2 for detailed cleaning and painting
pilferage. Inspection of the individual compo-
instructions.
AGO 8166A
