(2) Assemble shock mounts, figure 3-14.
c. Cleaning and Inspection.
(3) Assemble blower and engine frame,
(1) Clean frame with an approved sol-
vent.
(4) Mount blower, paragraph 5-14.
(2) Inspect for cracks, rust and mis-
alignment, Remove rust and repaint
(5) Mount engine, paragraph 5-13.
if required.
(6) Align coupling, paragraph 5-12.
d. Reassembly.
(7) Mount fuel tank, paragraph 3-36.
(1) Assemble wheels, figure 3-14.
(8) Assemble fuel line, paragraph 3-35.
Section XII. POWER PLANT
3-44. General
The military engine used on the rotary com-
engine will develop 3 HP at 3600 RPM. For all
presser is a 4-stroke cycle, overhead valve, air-
Operator and Organizational Maintenance In-
cooled engine. This engine is fully radio in-
struction, refer to Engine Technical Manual
terference suppressed and fungus-proofed. The
TM 5-2805-208-14.
