TM 5-4310-275-14
cleaning solvent, Fed. Spec. P-D-680. Do not
4-32. Separator and Filter
Assembly and Dump
soak the heater blanket.
Valve Removal and Installation
(2) Clean the dump valve with dry cleaning
a. Removal.
solvent, Fed. Spec. P-D-680.
(1) Depress push valve on the control panel
(3) Inspect f o r broken electrical leads,
to relieve air pressure (fig. 2-1).
(4) Inspect for damaged threads.
(2) Remove the pressure relief valve, check
c. Installation.
valve, and back pressure valve.
(1) Screw the dump valve onto the separator
assembly.
separator assembly.
( 4 ) Unscrew the dump valve from the
separator and filter assembly.
separator assembly.
(3) Install the pressure relief valve, check
WARNING
valve, and back pressure valve.
Dry cleaning solvent, Fed. Spec. P-D-680
or P-S-661, used to clean parts is
4-33. Instrument Panel
Gages, Valves and
potentially dangerous to personnel and
Fittings Removal and Installation
property. Avoid repeated and prolonged
a. Removal.
skin contact. Do not use near open flame
(1) Disconnect the air line at the component
or excessive heat. Flash, point of solvent
to be removed.
is 100 F. (38 "C. ) --138 F. (59 C.),
b. Cleaning and Inspection.
component.
(1) W i p e t h e d i r t f r o m t h e s e p a r a t o r
a s s e m b l y with a cloth dampened with dry