TM 5-4210-276-14
Table 4-2. Troubleshooting (cont)
Malfunction
Test or Inspection
Corrective Action
NOTE: TAG AND DISCONNECT ELECTRICAL LEADS AS NECESSARY.
b. Cleaning and Inspection.
(1) Clean the contact assembly with filtered, compressed air.
(2) Inspect contacts for pitted, burned, misaligned or worn surfaces,
(3) Inspect cam follower for cracks, breaks, or wear.
(4) Repair or replace any damaged or defective part.
c. Installation.
(1) Refer to figure 4-9 and install the contact assembly.
(2) Attach accessory case cover with spring clips.
d. Adjustment. Refer to figure 4-10 and adjust the contact assembly.
4-14
