Table 4-2. Troubleshooting (cont)
Teat or Inspection
Air cleaner service (Models 1A08-1
Drycleaning solvent, P-D-680, used to clean parts is potentially dangerous to per-
sonnel and property. Avoid repeated and prolonged skin contact. Do not use near
open flame or excessive heat. Flash point of solvent is 100F (38C).
(2) Remove lower section body and clean all parts with cleaning solvent, item 5, App. D. Dry
with compressed air and clean towels.
(3) After cleaning element, lubricate and reinstall. See figure 3-1 for lubrication instructions.
b. Service (Model 1A08-3).
(1) Service the air cleaner element when red signal reaches service level (fig. 4-12).