remove and disassemble centrifugal unloader as
CAUTION: Be sure to seal a large portion to the spring
shown.
in the cage in all valves.
2. Cleaning, Inspection and Repair.
a. Clean all parts with an approved cleaning solvent
b. Install intake and exhaust
as
and dry thoroughly.
instructed on figure 14
b. Replace all damaged or worn parts.
3. Reassembly and Inspection Refer to figure 16 and
I. CENTRIFUGAL UNLOADER
reassemble and install centrifugal unloader.
1. Removal and Disassembly. Refer to figure 16 and
Figure 16. Cylinder, valves and manifold assemblies exploded view.
16
