TM 5-4310-354-14
(Figure 4-21 Sheet 1 of 2)
(Figure 4-21 Sheet 2 of 2)
TS5-4310-354-14/4-21 (1)
A ENGINE AIR INTAKE
REMOVAL
INSTALLATION
STEP 1.
LOOSEN HOSE CLAMPS AND REMOVE
STEP 1.
INSTALL ADAPTER HOSE ASSEMBLY ON
FLEXIBLE METAL HOSE FROM ENGINE
ENGINE
AIR
CLEANER
OUTLET.
INTAKE
MANIFOLD
ELBOW
AND
SECURE WITH HOSE CLAMP.
ADAPTER TUBE.
STEP 2.
INSTALL
RESTRICTION
INDICATOR
STEP 2.
LOOSEN HOSE CLAMP AND REMOVE
HOSE ON INDICATOR.
INSTALL
ADAPTER TUBE. LOOSEN HOSE CLAMP
INDICATOR HOSE ON ADAPTER HOSE
AND
DISCONNECT
RESTRICTION
STEM AND SECURE WITH HOSE CLAMP.
INDICATOR HOSE FROM ADAPTER
INSTALL ADAPTER HOSE STEM AND
HOSE
ASSEMBLY.
REMOVE
SECURE WITH HOSE CLAMP. INSTALL
RESTRICTION INDICATOR HOSE FROM
ADAPTER TUBE IN HOSE ASSEMBLY
THE INDICATOR.
AND SECURE WITH HOSE CLAMP.
STEP 3.
LOOSEN HOSE CLAMP AND REMOVE
STEP 3.
INSTALL
FLEXIBLE
METAL
HOSE
ADAPTER HOSE ASSEMBLY FROM
BETWEEN ADAPTER TUBE AND ENGINE
ENGINE AIR CLEANER OUTLET.
INTAKE MANIFOLD ELBOW.
SECURE
EACH END WITH HOSE CLAMP
Figure 4-21. Engine and compressor air intake lines, hoses, and fittings, removal and installation (sheet 1 of 2).
4-43
