TM 5-4310-354-14
c. Installation.
(2) Refer to figure 4-21 and install the engine
and compressor air intake lines, hoses,
(1) Refer to figure 4-22 and install the
and fittings.
compressor control air hoses and fittings.
Section XIV. MAINTENANCE OF ENGINE FUEL FILTER GROUP
4-34. General. The engine fuel filter group consists of
(2) Inspect the mounting base stud for
the spin-on type, throw-away fuel filter, fuel lines, and
damaged threads, and cracks or breaks.
filter mounting base. The fuel filter is located on a dual
Inspect the mounting base for cracks and
mounting bracket with the engine lubricating oil filter on
breaks. Inspect the fuel lines for evidence
the left-hand side of the engine (facing engine flywheel).
of leakage, breaks in covering, and
connector threads.
4-35. Engine Fuel Filter Group.
(3) Repair of the engine fuel filter group is
limited to the replacement of defective
to remove and disassemble the fuel filter group.
parts.
b. Cleaning, Inspection, and Repair.
(1) Clean the underside of the mounting base
group.
with a clean, lint-free cloth soaked with
clean diesel fuel.
4-46
