TM 5-4310-354-14
(Figure 4-35 Sheet 1 of 2)
(Figure 4-35 Sheet 2 of 2)
TS5-4310-354-14/4-35 (1)
A
PRESSURE SWITCHES
B
WATER TEMP SHUTDOWN SWITCH
REMOVAL
REMOVAL
STEP 1.
DISCONNECT WIRE ASSEMBLIES FROM
STEP 1.
DISCONNECT WIRING
HARNESS
AIR PRESSURE SWITCH. REASSEMBLE
LEADS FROM SWITCH TERMINALS.
TERMINAL HARDWARE TO PREVENT
THEIR LOSS.
STEP 2.
UNSCREW
AND
REMOVE
ENGINE
WATER
TEMPERATURE
SHUTDOWN
STEP 2.
UNSCREW
AND
REMOVE
AIR
SWITCH FROM CYLINDER HEAD.
PRESSURE SWITCH FROM REDUCING
BUSHING.
INSTALLATION
STEP 3.
DISCONNECT WIRE ASSEMBLIES FROM
OIL PRESSURE SWITCH. REASSEMBLE
STEP 1.
INSTALL
ENGINE
WATER
TERMINAL HARDWARE TO PREVENT
TEMPERATURE SHUTDOWN SWITCH IN
THEIR LOSS.
CYLINDER HEAD.
STEP 4.
UNSCREW
AND
REMOVE
OIL
PRESSURE SWITCH FROM TEE.
STEP 2.
CONNECT WIRING HARNESS LEADS TO
SWITCH TERMINALS.
(REFER TO
WIRING DIAGRAM, FIG 1-3.)
INSTALLATION
STEP 1.
INSTALL OIL PRESSURE SWITCH IN TEE
ON BACK OF OIL PRESSURE GAUGE.
STEP 2.
CONNECT WIRE ASSEMBLIES TO OIL
PRESSURE
SWITCH
TERMINALS.
(REFER TO WIRING DIAGRAM, FIG 1-3.)
STEP 3.
INSTALL AIR PRESSURE SWITCH IN
REDUCING BUSHING ON BACK OF AIR
PRESSURE GAUGE.
STEP 4.
CONNECT WIRE ASSEMBLIES TO AIR
PRESSURE SWITCH TERMINALS. (REFER
TO WIRING DIAGRAM FIGURE 1-3.)
Figure 4-35. Safety switches, removal and installation (sheet 1 of 2).
4-79
