TM 5-4310-356-14
Figure 3-2. Belt guard assembly.
WARNING
3-8. Motor.
Dry cleaning solvent, P-D-680,
a. Cleaning.
used to clean parts is potentially
(1) Remove dust and dirt from the motor with
dangerous to personnel and
compressed air.
property. Use in a well ventilated
area as the fumes are dangerous
(2) Use a rag which has been dampened in
if inhaled. Avoid repeated and
cleaning solvent, P-D-680, to wipe off the motor.
prolonged skin contact. Do not
b. Inspection.
use near open flame or excessive
heat. Flash point of solvent is
(1) Inspect the shaft for movement (end
100 . -138 . (38 . -59 .).
F
F
C
C
play).
c. Cleaning. Clean the belt guard with a rag
(2) Notify organizational maintenance of a
dipped in cleaning solvent, P-D-680, and dry thoroughly.
defective motor or shaft.
3-8
