TM 5-4310-356-14
Figure 3-3. Air intake muffler.
first stage to second stage of the compressor through
(c) Remove plate (6).
the intercooler tube, then through the aftercooler tube to
(d) Remove element (4).
the air receiver tank, carries moisture (condensate) into
the receiver.
Frequent inspection and service is
(e) Remove screen (3).
necessary.
b. Inspection.
follows:
(1) Inspect the receiver for excessive
(a) Install the screen (3, fig. 3-4).
accumulation of dust, and leaking or spilled oil.
(b) Install the plate on the T-stud (9).
(2) Check air lines and the service line for
(c) Install cover lower (2) on the T-stud
leaks. Tighten loose connections.
and secure with wingnut (1).
c. Cleaning.
3-12. Air Receiver.
(1) Use compressed air to blow dust off the
a. General. The air receiver stores compressed
receiver.
air at a pressure between 165 and 190 psi, (11.60 and
13.36 kgs per sq cm). Compressed air, moving from
3-10
