TM 5-4310-368-14
Section III. MAINTENANCE PROCEDURES
3-5.
INTRODUCTION
This section provides maintenance procedures for the compressor operator. More detailed maintenance
procedures are provided in Chapters 4 through 6 for the organizational, direct support, and general support
levels.
3-6.
DETAILED MAINTENANCE PROCEDURES
WARNING
Never attempt to service any air compressor component unless the engine is stopped and the
system is relieved of all air pressure.
3-7.
EXHAUST MUFFLER
a. Inspection.
(1) Inspect muffler for leaks, cracks or other damage.
(2) Inspect muffler mounting hardware for loose or missing fasteners.
b. Replacement. Refer to organizational maintenance.
3-8.
SERVICE HOSE AND FITTINGS
a. Inspection.
(1) Inspect entire outer casing of hose for wear, fraying or other damage.
(2) Inspect fittings at each end of hose for damage.
b. Test. Refer to general support maintenance.
c.
Repair. Refer to direct support maintenance.
d. Replacement. Refer to organizational maintenance.
3-9.
ENCLOSURE ROOF
a. Inspection.
(1) Inspect roof panel for cracks, dents and paint damage.
(2) Inspect roof installation hardware for loose or missing fasteners.
b. Repair. Refer to organizational maintenance.
c.
Replacement. Refer to organizational maintenance.
3-9
