TM 5-4310-368-14
INITIAL SETUP
Applicable Configurations
All
Equipment Condition
Paragraph
Condition Description
Wheel and Tire Removed
a. Inspection
(1)
Inspect brake operating lever, extension rod, cross shaft and links for wear, thread damage and missing
parts. Replace as required.
(2)
Remove brake drum (paragraph 4-57).
(3)
Inspect brake cam and brake linings. Replace worn or damaged components.
b. Disassembly
(1)
Remove two nuts and lock washers. Remove brake lever.
(2)
Remove four bolts and lock washers. Remove brake cross shaft.
(3)
Remove cotter pin from two brake links.
(4)
Remove tire and wheel assembly (paragraph 4-55).
(5)
Remove hub cap and brake drum (paragraph 4-57).
(6)
Remove one pinch bolt and one nut from each brake arm. Remove two brake arms.
(7)
Remove retractor spring.
(8)
Remove brake shoes.
c.
Reassembly
(1)
Position brake shoes against brake backing plate. Secure with spring.
(2)
Position brake arm over serrated end of operating cam. Note proper angle.
(3)
Install and secure one pinch bolt, one nut and one lock washer.
(4)
Install brake drum (paragraph 4-57).
(5)
Align brake cross shaft supports with bolt holes in frame. Secure to frame with four bolts and four lock
washers.
4-57
