TM 5-4310-368-14
(3)
Separate wheel into two halves.
(4)
Remove tire and inner tube.
c.
Repair
(1)
Repair inner tube as required. Replace inner tube if not repairable.
(2)
Repair tire as required. Replace tire as required.
(3)
Repair wheel halves as required.
d.
Assembly
(1)
Install valve core into inner tube.
(2)
Add a small amount of air to inner tube.
(3)
Install inner tube into tire.
(4)
Install wheel halves onto tire and inner tube assembly.
(5)
Extend inner tube valve stem through hole in outer wheel half.
(6)
Align bolt holes in wheel halves. Secure with five bolts, five nuts and five lock washers.
(7)
Inflate to 25 - 35 PSI.
e.
Installation
(1)
Align bolt holes in wheel with studs in brake hub.
(2)
Slide wheel onto studs. Secure with five nuts and five lock washers.
(3)
Raise compressor off safety stands.
(4)
Remove safety stands and lower compressor. Remove jack.
4-56. BRAKE ASSEMBLY
This task covers:
a.
Inspection
b.
Disassembly
c.
Reassembly
4-56
