TM 5-4310-375-14
Figure 4-6. Cylinder head, first and second stage valves
(3) Place upper valve plate (4) on lower valve plate (8) in position as marked at disassembly.
(4) Place cylinder head gasket (3) and cylinder head (2) onto stacked valve plates. Install six cylinder head
bolts (1). Tighten bolts until snug; then, torque the bolts to 30-33 ft-lbs (4.1 - 4.6 kgs-m) in the letter
sequence, A through F, as shown in figure 4-6.
4-19
