TM 5-4310-376-14
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued
A - After Operation
D - During Operation
B - Before Operation
Interval
Equipment is
ITEM TO BE INSPECTED
Item
not Ready/Avail-
No.
PROCEDURE
able If:
A
B
D
COMPRESSOR ASSEMBLY - Continued
4
Pads dirty.
Air Cleaner - Remove filtering element, inspect,
Z
and clean pads if necessary (para. 3-6b).
Flywheel loose.
Flywheel - Inspect for cracks, wear, distortion,
Z
wear in grooves or keyway and other damage.
Air leaks.
Intercooler Tube (1) - Inspect for bent or broken
fins, dents, holes, cracks, or other damage.
5
Inspect all parts for cracks, breaks, and other
damage (para 3-7e).
Clogged filter.
Fuel Filter - Inspect filter for dirt. Replace if
necessary.
Air Cleaner (1) - Service after every 25 hours of
operation (para 3-6c).
Cartridge is dirty.
Paper Cartridge - Service after every 100 hours
of operation (para 3-6c).
Oil level low.
Lubrication system - Check oil level before each
start. Change oil after every 100 hours of
operation (para 4-7b).
AIR DISCHARGE SYSTEM
6
Loose fittings.
Inflator Gage - Inspect for breaks, defective
fittings or other damage.
Defective hose.
Air Hose - Inspect for cracks, breaks, cuts, or
Z
damaged fittings.
Valve leaks.
Globe Valve - Inspect for cracks, breaks, worn
threads, corrosion, or other damage.
2-7
