TM 5-4310-376-14
OPERATOR'S MAINTENANCE INSTRUCTIONS
Section I. LUBRICATION INSTRUCTIONS
Relieve air tank and compressor of pressure, before at-
tempting to service equipment, to avoid personal injury.
Lubrication is mandatory. No separate lubrication order
has been prepared.
a. Care of Lubricants. Keep all lubricants in sealed containers and store in a clean, dry area
away from heat. Do not allow foreign materials to come in contact with lubricants. Keep all
lubrication equipment clean and ready for use.
b. Points of Application Follow lubrication instructions given below. Apply only those lubri-
cants specified.
LUBRICATION CHART
Expected Temperature
Interval
Components
Capacity
+40F (4C) to
0F(18C) to
Above +32F (0C)
(Hours)
(Pints)
-25F (-4C)
to -10F (-12C)
OEA
100
OE/HDO 10
OE/HDO 30
Engine
2-1/2
100
OEA
OE/HDO 10
OE/HDO 30
3-1/2
For operation in protracted cold temperatures, below
-10F (-23.3C), remove lubricants prescribed in the
chart for temperatures above -10F (-23.3C) and
relubricate with those specified for temperature
b e l o w -10F (-23.3C).