TM 5-4310-380-13
3-11. MOTOR STARTER BOX - Continued.
a. Removal- Continued.
(4) Remove nut (5) and then remove conduit (6).
(5) Tag and disconnect pressure switch wiring (7).
(6) Remove nut (8) and then remove conduit (9).
(7) Remove four bolts (10), four lockwashers (11), and motor starter box (12).
Figure 3-4. Starter Box, Disassembly.
(1) Tag and disconnect wiring from off/auto switch (1).
(2) Remove nut (2) and remove switch (1).
(3) Remove nut (4) and remove reset switch (3).
(4) Tag and disconnect wiring from the contactor (5) and the overload (6).
(5) Loosen screws connecting T1, T2, and T3 on contactor (5).
GO TO NEXT PAGE
3-13