TM 5-4310-380-13
3-11. MOTOR STARTER BOX - Continued.
e. Repair. Repair of the motor starter box is limited to the replacement of defective components at the Unit
Maintenance Level.
NOTE
When installing new overload, set overload at 28 amps.
Figure 3-5. Starter Box, Assembly.
(1) Install fuse holder (22) and secure with two screws (21).
(2) Install two fuses (20) and connect wiring to fuse holder (22).
(3) Install three movable contacts (19) and three springs (18).
(4) Install six stationary contacts (17) and secure with six screws (16).
(5) Install two springs (14), coil (13), block (12) to base (15) and secure with two screws (11).
(6) Install cover (10) and secure with two screws (9).
GO TO NEXT PAGE
3-15
