TM 5-4310-380-13
3-12. PRESSURE SWITCH - Continued.
Figure 3-7. Pressure Switch, Removal.
(1) Loosen screw (1) and remove cover (2).
(2) Back off nut (3) and remove disconnect tube.
(3) Tag and disconnect wiring (4).
(4) Remove nut (5) and separate conduit (6) from pressure switch (7).
(5) Remove pressure switch from piping by turning counter-clockwise.
b. Cleaning.
(1) Remove all buildup of dirt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well-ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
GO TO NEXT PAGE
3-18