TM 5-4310-380-13
3-11. MOTOR STARTER BOX - Continued.
f. Assembly - Continued.
(7) Install contactor (5) and secure with two screws (8) to starter box.
(8) Install overload assembly (6) and secure with two screws (7).
(9) Tighten screws connecting T1, T2 and T3 on contactor block (12).
(10) Connect wiring from contactor (5) and overload (6).
(11) Install reset switch (3) and secure with nut (4).
(12) Install off/auto switch (1) and secure with nut (2).
Figure 3-6. Motor Starter Box, Installation.
(1) Install motor starter box (12) into position and secure with four bolts (10), and four lockwashers (11).
(2) Install conduit (9) into position and secure with nut (8).
(3) Connect pressure switch wiring (7) per the tagged identification.
(4) Install conduit (6) into position and secure with nut (5).
(5) Connect motor wiring (4) per the tagged identification.
END OF TASK
3-16