TM 5-4310-380-13
Section VII. MAINTENANCE OF COMPRESSOR DRIVE
Para.
Para.
Drive Belts
Cleaning .................................................. 3-14b
Drive Pulley (Cont.)
Inspection ................................................ 3-14c
Removal ..................................................... 3-15a
Installation ............................................... 3-14e
Repair ......................................................... 3-15d
Removal .................................................. 3-14a
Guard Assembly
Repair ...................................................... 3-14d
Cleaning ..................................................... 3-13b
Drive Pulley
Inspection ................................................... 3-13c
Cleaning .................................................. 3-15b
Installation .................................................. 3-13e
Inspection ................................................ 3-15c
Removal ..................................................... 3-13a
Installation ............................................... 3-15e
Repair ......................................................... 3-13d
3-13. GUARD ASSEMBLY.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Repair
e. Installation
SET-UP:
Tools:
1/2 inch wrench (2 each)
9/16 inch wrench (2 each)
17 mm wrench
Common screwdriver
Materials:
Brush, Medium Bristle (Appendix E, item 4)
Cloth, Lint-Free (Appendix E, item 3)
Solvent, Dry Cleaning (Appendix E, item 2)
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
Personnel:
1 Person
Equipment Conditions:
Electrical power removed at master control panel.
Tank drain cock open and air bled off (para. 2-4a & b).
GO TO NEXT PAGE
3-22
