TM 5-4310-380-13
3-12. PRESSURE SWITCH- Continued.
b. Cleaning - Continued.
(3) Allow to dry.
c. Inspection.
(1) Inspect for missing or damaged hardware.
(2) Inspect pressure switch for damage.
d. Repair. Repair of the pressure switch is limited to the replacement of the component parts contained in the
pressure switch repair kit (refer to TM 5-4310-380-23P). Refer to Figure 3-8 and proceed as follows to repair the
pressure switch.
Figure 3-8. Pressure Switch Repair.
(1) Open the housing cover (1).
(2) Remove contact block (2) by carefully prying keeper away from control block.
(3) Remove two screws (3) and carefully remove cover (4) while taking care that the springs (5) do not fly off
the contacts (6).
GO TO NEXT PAGE
3-19
