TM-5-4310-389-14Figure 5-3. Lower CrankcaseNOTENeed to see lift device notice.3. Remove the seven nuts (5)that secure the upper crankcase (6) to the lower crankcase (4) and lift the uppercrankcase away.4.Insert.0 mm feeler gauge between cam and pump tappet.5.Turn drive gear by hand. (It must be possible to rotate the cam; otherwise, fit an additional gasket betweenpump and housing. No clearance should appear between cam and pump tappet. The tappet must always sit onthe cam.)5-10
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
