TM-5-4310-389-14
General.
REPAIR
a.
Remove the bottom plate and the upper and front camshaft covers (figure 5-4). Disassemble the eccentric plate
ring on the camshaft gear wheel and dismount the camshaft gear wheel (figure 5-5). Remove V-belt pulley
(figure 5-6) and unscrew the nut on the flywheel (use hammer spanner No. 003-0670 (figure 5-7) or 2-15/16-inch
socket with breaker bar.
b.
Apply puller device No.003-0672 to flywheel; exert tension and loosen flywheel by tapping with hammer.
Figure 5-4. Removing Camshaft Cover
Figure 5-5. Remove the Camshaft Gearwheel
Figure 5-6. Remove V-Belt Pulley Nut
Figure 5-7. Removing Flywheel Nut
5-13
