TM-5-4310-389-14
6.
Remove eccentric belt pulley (3), bearing retainer (12), gasket (11), and eccentric shaft (19).
Replace bearing (10), gasket (11), and seal (13), if necessary.
7.
Inspect timing belt adjusting pulley bearing. Replace, if necessary.
b.
Reassembly.
1.
Install eccentric shaft (19) in lower crankcase (4) and torque retaining bolts.
2.
Install oil pump and perform steps (4 and 5) in paragraph a, above.
3.
Assemble upper crankcase (6) to lower crankcase (4) and torque nuts (5). Refer to Appendix F.
4.
Assemble the timing belt pulleys (3, 7, and 8) and belt (14). See paragraph 4-6.
5.
Install timing belt cover (1) and torque the four allen head bolts (2).
Refer to Appendix F.
5-11
