TM 5-4310-451-14
5-18. FRONT END PLATE REPLACEMENT (Cont).
b. INSTALLATIONI
1.
Install new gasket (1) on engine block (2).
2.
Coat new gasket (3) with grease and install on engine block (2).
3.
Install front end plate (4) on engine block (2) with two bolts (7), new lockwashers (8), 13 bolts (6), and new
lockwashers (5). Tighten bolts fingertight.
NOTE
Use sleeve bearings removed in paragraph 5-39 as a pilot to aline front end plate with engine
block.
4.
Install two sleeve bearings (9) through front en
plate (4) and engine block (2).
5.
Tighten bolts (6 and 7).
6.
Remove two sleeve bearings (9) from front en
plate (4) and engine block (2).
FOLLOW-ON TASKS:
áInstall camshafts (see paragraph 5-39).
áInstall engine (see paragraph 5-15).
5-31
.