TM 5-4310-451-14
5-19. REAR END PLATE REPLACEMENT (Con’t).
NOTE
Use sleeve bearings removed In paragraph 5-40 as pilots to aline rear end plate with engine block.
5.
Install two sleeve bearings (10) through rear end
plate (4) and engine block (6).
6.
Tighten bolts (8) and screw (1).
7.
Remove two sleeve bearings (10) from rear end
plate (4) and engine block (6).
FOLLOW-ON TASKS:
Install idler gear (see paragraph 5-40).
Install engine (see paragraph 5-15).
5-34
