TM 5-4310-451-14
5-19. REAR END PLATE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
áEngine removed (see paragraph 5-15).
Grease (Item 22, Appendix E)
áIdler gear removed (see paragraph 5-40).
One gasket
Eleven lockwashers
Tools/Test Equipment:
áGeneral mechanic’s tool kit
a. REMOVALI
1.
Remove screw (1), washer (2), and sleeve bearing (3) from rear end plate (4).
CAUTION
Support rear end plate on flat, even surface when removing screw Inserts to prevent bending and
warping.
2.
Remove ten bolts (8), lockwashers (7), rear end plate (4), and gasket (5) from engine block (6). Discard
lockwashers and gasket.
5-32
