TM 5-4310-451-14
5-19. REAR END PLATE REPLACEMENT (Con’t).
3.
If damaged, place rear end plate (4) on flat, even surface and remove screw inserts (9).
b. INSTALLATION
CAUTION
Support rear end plate on flat, even surface when Installing screw Inserts to prevent bending and
warping.
1.
If removed, install screws inserts (9) in back of rear end plate (4).
2.
Coat new gasket (5) with grease and install on engine block (6).
3.
Install rear end plate (4) on gasket (5) and engine block (6) with ten new lockwashers (7) and bolts (8). Tighten
bolts fingertight.
4.
Install sleeve bearing (3) through rear end plate (4) with washer (2) and screw (1). Tighten screw fingertight.
TA704915
5-33
