TM 5-4310-451-14
5-100. AIR COMPRESSOR ASSEMBLY REPLACEMENT (Con’t).
b. INSTALLATION
1.
Install drive ring (7) on engine (1) with eight new lockwashers (6) and bolts (5).
2.
Attach suitable lifting device to air compressor assembly (2).
WARNING
Use extreme caution when handling heavy parts. Lifting device is required when parts weigh over
50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two person lift, and over 150 lb (68 kg)
for a three or more person lift. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause serious injury or death to personnel.
3.
Position air compressor assembly (2) on engine (1) aligning marks.
NOTE
When installing bolts and lockwashers, install at 3 o’clock and 9 o’clock positions first, then install
remaining hardware. Install 24 new lockwashers (3) and bolts (4) on air compressor assembly (2)
and engine (1).
FOLLOW-ON TASKS
Install engine and air compressor (see paragraph 5-15).
TA705225 4
5-375
