TM 5-4930-207-34
NOTE
4-17. Crankcase and Crankshaft
R e a s s e m b l y and Installation
Avoid touching clean bearings with bare fingers;
do not spin bearing while dry.
4-16. Crankcase and Crankshaft
reverse order.
I n s p e c t i o n and Repair
b. Installation.
(1) Install centrifugal unloader as instructed
a. Inspection.
in section III (para 4-12).
(1) Inspect crankcase for cracked and
(2) Install cylinder and pistons as instructed
chipped castings and damaged stud threads.
in section II (para 4-8b (1) and (2).
(2) Inspect cups,. seal, and bearing for ex-
( 3 ) Install flywheel as instructed in TM
cessive wear and damage.
6-4930-207-12.
(4) Refer to TM 5-4930-207-12 and install
b. Repair. Repair by discarding all damaged
the compressor assembly.
and excessively worn or damaged parts.
4-6
