(3) Replace a damaged or worn part.
disassemble the taillight.
c. Cleaning, Inspection and Repair.
the stoplight and reflectors.
(1) Clean all metal parts with an ap-
proved cleaning solvent and-dry thoroughly.
(2) Inspect for cracks, breaks, corroded
a. Removal. Refer to figure 3-9 and remove
terminals, worn or frayed leads, and other
the trailer clearance lights and lamps.
damage.
(3) Replace a damaged or defective part.
b. Disassembly. Refer to figure 3-11 and
disassemble the trailer clearance lights.
d. Reassembly. Refer to figure 3-10 and
reassemble the taillight.
c. Cleaning, Inspection, and Repair.
(1) Clean all metal parts with an ap-
proved cleaning solvent and dry thoroughly.
the taillight.
(2) Inspect for cracks, breaks, worn or
frayed leads, and other damage.
(3) Replace a damaged or defective part.
Reflectors
a. Removal. Refer to figure 3-9 for removal
assemble the trailer clearance lights.
of stoplights and reflectors.
b. Cleaning and Inspection.
the trailer clearance lights.
(1) Clean all metal parts with any ap-
proved cleaning solvent and dry thoroughly.
(2) Inspect for cracks, breaks, corroded
terminals, worn or frayed leads, and other
a. Removal.
damage.
(1) Remove the fuel level sender (75, fig.
