TM 5-4930-218-14
gases are piped to the outside.
WARNING
Inhalation of exhaust fumes will
Be sure that you do not operate the
result in serious illness or death.
lubricating and servicing unit in an
enclosed area unless the exhaust
Section Ill. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
organizational maintenance of the lubricating and
4-5. Tools and Equipment
servicing unit.
Tools, equipment, and repair parts issued with the
lubricating and servicing unit are described in
Repair parts and equipment are listed in the
Auxiliary Equipment.
repair parts and special tools list covering
organizational maintenance for this equipment.
Refer to TM 5-4930-218-24P.
No special tools or equipment is required for
Section IV. LUBRICATION INSTRUCTIONS
ditional lubrication information.
4-8. General
This section contains supplemental information
and lubrication instructions that must be followed
Lubrication at organizational maintenance con-
for the lubricating and servicing unit at the
sists primarily of lubricating trailer wheel bearings.
organizational maintenance level. Refer to LO 5-
Refer to paragraph 4-58 for wheel bearing main-
4930-218-12 for your lubrication points, intervals, and
tenance and lubrication instructions.
detailed instructions. Also, reference to paragraphs
3-2 and 3-3 of this manual will provide you with ad-
Section V. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
(MONTHLY AND QUARTERLY)
tenance.
4-10. General
This section lists the preventive maintenance
checks and services which shall be performed on a
Services
monthly or quarterly basis by organizational main-
tenance personnel. It includes and expands upon the
Refer to table 4-1 for a listing of the preventive
preventive maintenance services performed by
maintenance checks and services which are allocated
operator/crew maintenance and includes additional
to organizational maintenance.
services which are allocated to organizational main-
Checks and Services
