TM 5-4930-218-14
dispensing reels. Lifting handles are provided to aid
enclosure removal. The enclosure is mounted on a
a. Removal.
welded frame and is secured to the frame with four
(1) Open the door of the enclosure to provide ac-
lifting eyes. The frame also provides a mounting for
cess to the fuel housing and cap assembly (3, fig. 4-3)
trouble light reel.
from within the enclosure. Loosen the nut and rotate
b. The battery box is mounted at the rear of the
the handle to release the housing and cap assembly.
unit and provides a drawer in which the batteries are
Disengage it from the inside of the enclosure.
mounted, drawers for storage of accessories, and a
(2) Make sure all access doors of the enclosure
mounting for the hose reels. The battery drawer is
are closed.
mounted on rollers to permit easy opening of the
(3) Remove the four lifting eyes (1, fig. 4-1) that
drawer to facilitate battery service.
secure the enclosure (2) to the frame (15). Grasp the
enclosure by the four lifting handles and raise the en-
c. The tool box is mounted in the middle of the skid
closure straight up to remove it from the frame.
base. The tool box and the upper storage drawer in
Remove the spacer washers (3).
the battery box have trays to protect the stored
equipment.
