(3) Remove the eight hex head bolts (15, fig. 60) and special washers (16) and lift the air discharge manifold
(17) and gaskets (14) away from the compressor cylinder head and aftercooler. Remove the packing and
sleeve (22 and 25, fig. 51) from the manifold discharge opening.
Figure 60. Exploded view of compressor cylinder head, valves and manifold.
b. Cleaning and Inspection. Clean the interior of the air discharge manifold with compressed air. Wipe the exterior
of the Casting with a cloth dampened in cleaning solvent. If the packing (22, fig. 51) is not in good condition, it must be
discarded and replaced. Replace the four manifold gaskets.
135