TM9-4310-396-13
b. Remove Engine Generator Stator and Stator Housing.
NOTE
Observe location of wires on engine generator stator.
(1)
Remove tapping screws (1, Figure 5-8).
(2)
Remove engine generator stator (2).
(3)
Remove cap screw (3).
(4)
Remove stator housing (4) from engine flywheel (6, Figure 5-5).
c. Remove Current Limiter.
(1)
Disconnect wire connector (7, Figure 5-8) from current limiter (8).
(2)
Disconnect ground wires (9) from cap screws (10).
(3)
Remove cap screws (10).
(4)
Remove current limiter (8).
Figure 5-8. Engine Generator and Current Limiter.
5-14
