TM 9-4310-397-14(5)Torque the three hex nuts (2) securing the pump to the front plate to 18 ft-lb (25 Nm).CAUTIONWhen tightening fuel pressure lines at fuel injection pump, be sure not to turn fuel injectionpump fittings. Turning of these fittings may cause internal pump damage.(6)Connect injection pump pressure lines (Figure 6-17, 1). Torque fuel pressure lines at pump to 18 ft-lb (25Nm). Use special crowfoot wrench (item 10, section III, appendix B).Figure 6-17. Injection Pump Line Connection(7)Connect fuel supply line (2), return line (3), shut-off wire lead and speed control rod.(8)Install timing hole cover plate (4) and gasket (5). Torque screws (6) 17 lb-in (2 Nm).(9)Install engine per paragraph 4-72.6-17
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
