TM 9-4310-397-14
6-6. ROCKER ARMS, CYLINDER HEAD, AND VALVES REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning
c.
Inspection
d.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Automotive Maintenance and Repair
Item 2, Section III, Appendix B
Engine coolant drained. (See para 4-6, e.)
Exhaust manifold removed. (See para 4-71.)
Personnel Required:
Engine air cleaner removed. (See para 4-61.)
Thermostat housing removed. (See para 4-70.)
Two
Fuel filter removed. (See para 4-69.)
Injection nozzles removed. (See para 6-3.)
Rocker arm cover removed. (See para 5-6.)
a.
Removal.
(1)
Remove two hex head bolts (Figure 6-20, 1) and remaining fuel filter housing assembly (2) with tubing in
place.
Figure 6-20. Fuel Filter Housing
(2)
Remove rocker arm assembly.
(3)
Remove wear caps from valve stems.
(4)
Lift push rods from their bores.
(5)
Remove fourteen cylinder head cap screws.
6-21