TM 5-4220-233-14
4-51. INTERVEHICULAR CABLE.
This task covers:
a.
Removal
b.
Installation
c.
Repair
INITIAL SETUP :
Tools
Materials/Parts Appendix D
Screwdriver, Cross Tip
Varnish, Electrical ( item 18)
Screwdriver, Flat Tip
Wrench, 3/8"
Equipment Conditions
Wrench, 11/32'
None
a.
Removal.
WARNING
SHOCK HAZARD. Prior to working on electrical system ensure
intervehicular cable is not connected. Failure to follow this warning may
result in serious injury.
Figure 4-41. Replace Intervehicular Cable.
(1) Open lid on electrical box (1) by loosening four screws (2) and sliding clips (3) off edge of lid.
(2) Disconnect wires on intervehicular cable from five fusible links (4) and terminal board (5).
(3) Remove stuffing tube cap (6) and pull intervehicular cable out of stuffing tube body (7) and electrical box
(1).
(4) Slide stuffing tube cap (6) and packing assembly (9) off of cable (8) and retain for reinstallation.
b.
Installation.
(1) Slide cap (6) and packing assembly (9) onto new intervehicular cable (8).
(2) Insert cable (8) through stuffing tube body (7) into electrical box (1).
4-83