and bushings (42). Remove nuts
(6) Remove compressor.
(43), washers (44), and screws (45).
b. Installation.
(6) Remove screws (27), washers (28),
(1) Position compressor on the chassis
fan guards (31 and 32).
with a suitable hoist or lifting device.
(2) Secure with washers (2) and screws
(7) Remove the compressor and engine.
(1).
(8) Support the compressor. Remove
screws (1) washers (2), and the com-
(3) Connect all oil lines leading to the
pressor.
compressor.
(4) Connect all controls and linkages for
b. Installation.
(1) Install washers (2, fig. 25), screws
operation of the compressor.
(1) and the compressor on the engine.
(6) Install doors, panel, and housing as-
(2) Sling the engine and compressor. Use
sembly (paras 61 and 63).
a hoist or other suitable device to posi-
115. Engine
tion them on the skid frame.
(3) Install washers (28), screws (27),
a. Removal.
and fan guards (31 and 32).
(1) Remove doors and panels (para 61)
(4) Install screws (45), washers (44),
and housing assembly (para 63).
and nuts (43). Install bushings (42),
(2) Disconnect all controls and linkages
screws (41), mountings (40), wash-
from the compressor and the engine.
ers (39), and nuts (38).
(3) Disconnect all air, oil, and water lines
(5) Connect all air, oil, and water lines
from the compressor and the engine.
to the compressor and the engine.
(4) Place a sling under the compressor
(6) Connect all linkages and controls to
and engine. Take up the slack with a
the compressor and the engine.
suitable hoist or other lifting device.
(7) Install housing assembly (para 63)
(5) Remove nuts (38, fig. 25), washers
and doors and panels (para 61).
(39), mountings (40), screws (41),
AGO 8166A
