Figure 46. Setscrew staking.
Figure 43. Bushing alignnment.
Figure 44. Drive gear installation.
Figure 47. Gear and shaft alignment.
Recheck for freeness of pump gears.
If they do not rotate freely, loosen and
reposition body.
Caution: Failure to replace oil
relief shield will cause a rear main
crank seal leak.
(15)
Assemble lead oil inlet cover gasket
(16) to bottom of balancer housing.
Assemble oil inlet cover (15), oil inlet
strainer frame (14) and oil inlet
strainer spacer (13 ) with hex head
Figure 45. Pin hole drilling.
79
