TM 5-4310-354-14
Section VII. OIL PAN AND OIL PUMP ASSEMBLY
7-14. General. The oil pan serves as a cover for the
7-15. Oil Pan.
bottom of the crankcase and as an oil reservoir. The oil
pump is attached to the side of the cylinder block with
a. Removal.
the lower end extending into the oil pan. The oil is
drawn into the pump through a large screen which
(1) Remove the engine from the unit (para 5-12. a.
prevents coarse dirt from entering the pump. The pump
and figure 5-7).
requires no priming and is driven by a gear that engages
a toothed portion of the camshaft, located near the
(2) Open drain cock (3, figure 7-41) and drain oil
center of the camshaft.
into a suitable container.
1.
Hose clamp
9.
Gasket (2)
2.
Drain hose
10.
Seal (2)
3.
Drain cock
11.
Nut (4)
4.
Drain plug
12.
Lock washer (4)
5.
Gasket
13.
Cap screw (4)
6.
Cap screw (20)
14.
Lock washer (4)
7.
Lock washer (20)
15.
Adapter (2)
8.
Oil pan
TS 5-4310-354-14/7-41
Figure 7-41. Oil pan and adapters, removal and installation.
7-46
