TM 5-4310-368-14
(5)
Align bolt holes in tool box with bolt holes in enclosure panel.
(6)
Install and secure screws and nuts.
4-19.
END PANELS AND SIDE PANEL
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Applicable Configurations
All
Equipment Condition
Paragraph
Condition Description
Door Panel Removed
End panels and side panel are all removed in a similar manner.
a.
Removal
(1)
Remove four screws and four nuts from ends of panel.
(2)
Remove three screws from bottom of panel.
(3)
Remove panel from enclosure.
b.
Repair
(1)
Repair panel as required.
(2)
Paint panel with proper paint.
c.
Installation
(1)
Position panel into enclosure opening.
(2)
Align bolt holes in bottom of panel with bolt holes in frame. Loose assemble panel to frame with three
screws.
(3)
Align bolt holes in panel with bolt holes in adjacent panel.
4-18
